欢迎光临无锡市居山机械制造有限公司官方网站 设为首页 | 加入收藏 | 联系我们
居山机械
网站首页 公司简介 产品中心 新闻动态 客户留言 联系我们
 
 
MW5系列电磁吸盘
MW04系列电磁吸盘
MW84系列电磁吸盘
永磁吸盘
电磁除铁器
电缆卷筒
整流控制柜
 
 
无锡市居山机械制造有限公司
地址:无锡锡山区羊尖镇龙凤巷村钱家塘1号 
电话:0510-88310933 
传真:0510-88310933
手机 : 13003373035 -15365251353
网址:http://www.jushanjx.com
 
 
 
新闻中心 您现在的位置:返回首页>新闻中心

电磁吸盘的给进速度如何调整?

发布者:admin  发布时间:2017-02-24  点击:756
磨削平面,一般以一个平面为定位基准,磨削另一个平面,如果两个平面都要求磨削时,可互为基准反复磨削。电磁吸盘根据需要调整进给速度,磨削可停机,以较精确检查尺寸。
  平面磨削方法有两种,一种端磨法,用砂轮端面进行磨削,因其接触面大,易发热,且冷却液难以浇到工件易发热变形,因而磨削精度较低,但生产率较高。另一种周磨法。刚好端磨法相反,它磨削效率较低,但加工精度较高。 电磁吸盘有的时候也采用粘结磁体的方式,这其中有利有弊,利大于弊,采用这种方式的优点是什么呢?
  1)形状自由度大 容易制成形状复杂的磁体或薄壁环、薄片状磁体。注射成形时还能嵌入其他零件一起成形。
  2)电磁吸盘尺寸精度高,不变形烧结磁体的收缩率为13%~27%,而粘结磁体的收缩率只有0.2%~0.5%。不需要二次加工就能制成高精度的磁体。

Grinding plane, generally with a plane as the positioning datum, grinding another plane, if the two planes are required to grinding, can be the basis of repeated grinding. According to the need to adjust the feed speed, grinding can be stopped, to check the size of the more accurate.
There are two kinds of plane grinding method, an end grinding method, grinding wheel surface, because of its large contact surface, easy to heat, and the cooling liquid to pour into the workpiece heat deformation, thus grinding accuracy is low, but higher productivity. Another grinding method. On the contrary, the grinding efficiency is low, but the machining precision is high. Sometimes the magnechuck bonded magnets, the advantages outweigh the disadvantages, the There are both advantages and disadvantages., what are the advantages of this approach?
1 the degree of freedom of the shape is easy to be made into a magnet with a complex shape or a thin wall ring and a thin sheet magnet. Injection molding can also be embedded with other parts forming.
27%. The high precision of the electromagnetic chuck, the shrinkage rate of the sintered magnet is 13% ~ ~ ~ (2), and the shrinkage rate of the bonded magnet is only about 0.2% ~ 0.5%. High precision magnets can be made without two machining.
    

 
COPYRIGHT © 2016 无锡市居山机械制造有限公司 版权所有 ALL RIGHT RESERVED.
地址:江苏省无锡市锡山区羊尖镇龙凤巷村钱家塘1号 邮编:214000 电话:0510-88310933 传真:0510-88310933
手机:13003373035 邮箱:wxjsdc@163.com