欢迎光临无锡市居山机械制造有限公司官方网站 设为首页 | 加入收藏 | 联系我们
居山机械
网站首页 公司简介 产品中心 新闻动态 客户留言 联系我们
 
 
MW5系列电磁吸盘
MW04系列电磁吸盘
MW84系列电磁吸盘
永磁吸盘
电磁除铁器
电缆卷筒
整流控制柜
 
 
无锡市居山机械制造有限公司
地址:无锡锡山区羊尖镇龙凤巷村钱家塘1号 
电话:0510-88310933 
传真:0510-88310933
手机 : 13003373035 -15365251353
网址:http://www.jushanjx.com
 
 
 
新闻中心 您现在的位置:返回首页>新闻中心

电磁吸盘如何选型?

发布者:admin  发布时间:2017-02-24  点击:801
强力电磁吸盘在铣床以及刨床加工中比较常用。而且强力电磁吸盘的种类也很多,有铣刨用的强力电磁吸盘、磨用多功能强力电磁吸盘以及大水磨用强力电磁吸盘等。针对不同的强力电磁吸盘,用户可以根据参数和需要进行选择。强力电磁吸盘的选型是使用前的关键环节,选型方法如下:
    强力电磁吸盘的力气行程,力气行程是指强力电磁吸盘的滑杆方位相对于彻底吸合状况方位的间隔,强力电磁吸盘在工作中发生不一样的行程会发生不一样的力气,通常情况下行程越小力气越大。
    从强力电磁吸盘的呼应时刻来看,即是强力电磁吸盘从通电到滑杆完毕等待位移的时刻。
    若是强力电磁吸盘是选用沟通电源的话,那么则需选用整流器将沟通变换为直流,强力电磁吸盘的整流器在原理上应规划满足波段型整流器。整流器元件的峰值变换电压要是强力电磁吸盘驱动电压的三倍。
    核算强力电磁吸盘的周期负载,周期负载=[通电时刻/(通电时刻+断电时刻)] x 100。电磁吸盘在通电后会发热,所以周期负核和最时刻决议了电磁吸盘温升,起重电磁铁的温升和环境温度决议了起重电磁铁绝缘等级的挑选。


Strong electromagnetic sucker in milling machine and planer processing commonly used. But also a variety of powerful electromagnetic chuck, a milling plane with a powerful electromagnetic chuck, grinding with a powerful electromagnetic chuck, as well as large grinding with strong electromagnetic chuck, etc.. Depending on the powerful electromagnetic chuck, the user can choose according to the parameters and needs. The selection of powerful electromagnetic chuck is a key link before use:
Powerful electromagnetic chuck strength strength refers to the travel itinerary, the slide bar orientation with respect to the range of interval completely pull powerful electromagnetic chuck, powerful electromagnetic chuck occur as the stroke at work will occur as the strength, usually the smaller the greater strength of travel.
From the powerful electromagnetic chuck echoes time, that is, the strong electromagnetic sucker from the electricity to the slide rod is completed waiting for the displacement of the moment.
If the powerful electromagnetic chuck is the choice of communication power supply, then you need to choose the rectifier will be converted to DC communication, strong electromagnetic chuck rectifier in principle should be planned to meet the band rectifier. If the peak voltage of the rectifier element is three times the driving voltage of the strong electromagnetic chuck.
The accounting period strong electromagnetic sucker load, load power moment / N cycle (electrifying moment power-off time x 100 +)]. The electromagnetic chuck will generate heat after the power is turned on, so the periodic negative core and the most moment decide the temperature rise of the electromagnetic sucker, the temperature rise of the lifting electromagnet and the environmental temperature determine the selection of the insulation level of the lifting electromagnet.
    

 
COPYRIGHT © 2016 无锡市居山机械制造有限公司 版权所有 ALL RIGHT RESERVED.
地址:江苏省无锡市锡山区羊尖镇龙凤巷村钱家塘1号 邮编:214000 电话:0510-88310933 传真:0510-88310933
手机:13003373035 邮箱:wxjsdc@163.com